Every woodworker needs a couple of levels. You probably won’t need one of the 6-foot levels used in construction, but 48” is a good length for many of the woodworking projects you’ll do. Usually, you’ll also need an 8” level too, usually known as a torpedo level. You’ll check the level and plum of your construction. Level means horizontal, and plumb is vertical.
The solution to potentially wedged boards on a jointer is to add a planer to the mix. A planer has a flat surface with a cutting edge that is exactly 180 degrees to the surface. This allows you to position the jointed edge flat on the planers surface and make a cut to the opposite side of the board that is perfectly square. As an added bonus, the planer allows you incredible control over the thickness of the boards you're planing.
About Youtuber Tom Fidgen is an author, musician, designer/maker living in Toronto, Ontario.He is the owner and lead instructor of The Unplugged Woodshop- Toronto, Canada's first, hand tool only woodworking school.Tom has written for Fine Woodworking Magazine, Popular Woodworking Magazine, Canadian Woodworking Magazine, Furniture & Cabinet Making Magazine, British Woodworking Magazine, as well as the Lee Vall.
Most chisels are beveled on the 2 sides and on the cutting edge, but specialty chisels may only be beveled at the cutting edge. This bevel will be at 20 to 25 degrees down the length of the blade on one side, and flat on the backside. The blade will be between 4” and 7” long. Make sure you get chisels with a grip that fits your hand. If the grip is too small, you won’t be able to hold the chisel steady as you work. Be sure to use a mallet or wood hammer when you work, so that you don’t destroy the head on your chisel. Keep track of the edge caps, keep them sharp, and oil the metal now and then after you’ve used them, and they should be good for years. If you don’t have the edge caps, get a roll to keep them in. This will prevent them from bouncing around in your tool box drawers and getting damaged.
Just how small? Will you have an extra bedroom for your shop or will you be doing woodworking in your living room? Do you have to put the projects and tools away every time you want to entertain or will you leave everything set up all the time? A while back FWW had a video tour of a shop in Japan that was smaller than small. I'll try to find it and get back. Found it... shows what can be done in a small space but this shop was not on a small budget so no help there.
The majority of books I read are lost to my memory since I had originally read them in high school when I was very active in scouting. I fell out of focus and didn't really get interested again in woodworking specifically until the last few years as my desire for learning self-sufficient skills has grown beyond just survivalism. I've read the first five Foxfire books and paid great attention to the various non-electric projects and old fashioned woodworking skills. I have also begun to watch episodes of the Woodwright's Shop (my father used to watch it heavily, but at the time I paid very little attention) and wish the first season was online since he does a lot of the basics in that first season. Most of my other reading has been online or watching videos such as the construction of a woodworking bench and the like. I do get smanterings from other books such as the Back to Basics by Abigail Gehring.
I just do it. Lol. Most of my projects are for my wife so its easier to scrape money together then listen to complaints about them not getting done! Seriously though, its tough. I have two expensive hobbies......woodworking and bass fishing, latter of the two being the worst. I reserve all my side work money for the two. One thing that helps is owning our own saw mill, lumber is basically free other then time.
Carl Jacobson has created over 350 videos to overwhelm you with project ideas, some of which you can complete in less than an hour. He takes you through the entire process from preparing the wood to the sanding and finishing of the project. Carl releases a new video every Friday with a follow-up video every Monday to answer questions based on the feedback he received over the weekend.
If you’ve been reading my regular blog, unbrokenfurniture.com, then you already know that I’m a novice furniture upcycler. Up until now I’ve been repairing and refinishing existing furniture. Lately I’ve been picking up more and more reclaimed wood and other raw materials, so I’ve decided to learn to build some furniture from scratch. Because building furniture from scratch doesn’t really fit with the theme of unbrokenfurniture.com, I’ve decided to keep these projects on a separate space, hence woodworkingwednesdays.com was born. I’m planning to post one new project each week (hopefully Wednesday).
Oak is one of the most widely used and respected hardwoods in furniture making. Available in two varieties — red and white — oak is very strong and also quite heavy. White oak is sometimes preferred for furniture making because it has a slightly more attractive figure than red oak, but either variety can give you a beautiful finish that stains very well. Oak can be used for almost any woodworking purpose, and is an excellent choice for pieces that will last a lifetime – literally! As they say, it is “solid as oak”!
Frank’s work is visually arresting. This is not necessarily a channel you’re going to learn from, if you’re a novice woodworker or just getting into the field. The main reason to subscribe to Frank’s channel is how gorgeous his work is. The pieces he makes are always artfully conceived, even if it’s just a simple bookcase or a bench. Add to that his killer stop-motion and filmmaking skills, and you get a YouTube channel you can share with anyone, even if they think they’re not remotely interested in the craft.
By the way, before you yell at me about the fact that the price on the links for the nail gun is more than $200, listen up I have a handy tip: There are sales throughout the year on this exact package for $200. That’s how I bought mine. Just keep checking back. And be sure to follow me on social media. I keep checking it, too and if I see it’s on sale, I will post it to let you all know!
I’m going to find a different piece of metal, and I’ll post a video of the working track when it’s done. I bet some of you are coming to expect failure from this blog. I warned you in the beginning that I’m new to this. I’m trying to share my experience from both my successes and my failures. It just so happens that I have a lot more failures so far.
The level of sophistication in a $250 shop is significantly less than a $2,500 shop. But keep in mind even a $2,500 budget is entry level. Acquiring a shop full of the perfect tools for each and every job takes a life time. But that doesn't mean that producing quality work takes a lifetime. One of the most enjoyable aspects of this hobby is the constant need to solve problems in order to produce good work.
Just like a hammer and tape measure, a drill is something a lot of people already keep on hand for small household projects. Danny and I started out on a SUPER cheap drill when we first got married and quickly learned that this was not something to cheap out on. If you plan to do much woodworking, invest in a quality drill. It doesn’t have to be the best of the best, but do at least get a mid-grade drill.
A layout square, or combination square, comes in 6” and 12” sizes. Most woodworkers use the 6” model, simply because it’s easiest to carry around. Also, most of the stock you’ll use will be no bigger than 6” wide, so 12” is overkill. The layout square is a triangle that you can use to mark square cuts on stock. Once you measure the length of the cut, you line up the layout square with the edge of the board. The short side will give you a straight, square cut across the end grain. You can also measure off angles with the layout square. This helps when you’re trying to measure for a bevel on a table saw, or marking a cut for a miter saw. You can even use your layout square to determine an existing angle. Just be sure to buy one made of metal. The plastic ones are not only fragile, but they also can warp, making them pretty useless.
These how to videos and articles of information are dedicated to my woodworking instructor who trained me during my apprenticeship. This body of work is also in honor of the journeyman who were generous in sharing their woodworking knowledge and skills with me throughout my long career. All of you have helped me to make a wonderful living in a great craft. My hat is off to all of you.
Thanks for the feedback. We’re glad you found the list helpful. Please note that this page contains only 10 of the 40 top tools for woodworking, displaying only hand tools. You can find the next 10 here: https://www.wagnermeters.com/top-40-woodworking-tools-2/. There are links at the bottom of each article to the next group of tools so you can view the entire list. Hope this helps.
You can create a beautiful coffee table by simple stacking logs together. Line the logs end up and create a circle whatever size you need. Then just tie them all together with rope or twine to keep your coffee table secure. You do need to make sure that the logs are the same height and you may want to sand the tops down just a bit to make them smooth.
Steve Ramsey makes woodworking fun. His YouTube Channel, Woodworking For Mere Mortals Building, shows Steve making cool stuff in his garage in Marin County, California. From games and toys to special holiday projects during his 12 days of "Craftmas" (wooden snowflakes!), Steve consistently puts out new DIY woodworking videos and projects every Friday.
We've written about routers on the site before and my favorite is the Bosch 1617. It is light enough that you can control it when using it handheld, yet powerful enough that it won't have any problems when you mount it under a table. On top of that, it comes with a plunge base which makes it significantly easier to use handheld. The package clocks in at ~$190.
Tung oil is derived from the nuts of trees that are native to Asia but have been cultivated in other parts of the world. This is a durable finish that has a rather quick drying time and is very moisture resistant. Tung oil penetrates the woods surface, soaking deep into the wood grain for a fine finish. Tung oil is great for exterior furniture, tabletops and countertops.
At $300, the saw is expensive, but it is one of the more affordable saws that offer a 12 inch blade and a double bevel. The double bevel allows you to adjust both the angle at which the blade cuts into the wood and the tilt of the blade relative to the workpiece. Having control over both angles allows much easier cuts of trims and moldings. It's one of those features that you won't use with every project - but when you do need it, you'll be glad you have it
I wouldn’t give up on Craigslist or garage sales.. For around $1K or less, you can pretty easily find the four big ticket items (TS, BS, Jointer and Planer) and have the extra $2K to spend on accessories, material, DC, other goodies, etc. The key is patience and persistence, and if applied correctly, you can have a fantastic setup for very little compared to purchasing new. If you are setting up a business, you don’t usually have the time to scour for good deals, but for a personal shop, there is no pressing need other than that itch to get something done.