Just a little nitpick on the tape measure blurb. The hook should not be completely tight. It should move in and out about a 1/16th or the thickness of the hook. This way you get an accurate measurement whether you hook a part to measure or bump up to it. If you want more accurate measurements with a tape measure, “burn” an inch instead of hooking or bumping the part. Just line up what you want to measure with the 1″ mark and subtract that inch from the final measurement.
Mitre Block/Box for Cutting Coving Skirting Boards Polypropylene mitre box for accurate cutting of mitres and butt joints. Colours may vary from image shown. Stock No: 633731 EAN: 5055058172877 External Size: LxWxD = 300x140x75mm Internal Size : LxWxD = 300x105x58mm Colour: May Vary: Image is for illustration purposes only. Manufacturer: Silverline.
If you’re woodworking as a hobby, you already know that it can get very expensive. Saving money by not buying redundant tools is one way to keep it slightly more affordable. If you’re doing this as a business like I am, then every dollar saved is another dollar you can invest in your business. If you have other money saving tips, please feel free to share them!
As with most websites, we do log web visits. This information, however, does not have a link to you personally. These logs help us understand the needs of our audience and the areas of our site that you do or do not find useful. When you simply browse our site, no personal information is being collected.  We may disclose this non-personal information to third parties such as sponsors, clients or advertisers.

When I bought my miter saw, I didn’t buy the cheapest, but I didn’t want to spend a ton of money. I started out with a small Hitachi.  I LOVE my saw and it does a great job—I have no complaints.  However, I do kind of wish I had gotten a larger one.  Here’s the thing.  I can cut up to a 1×6 board in one pass on my miter saw.  But if I cut any larger than that, I have to flip the board over and cut again from the other side.  That means if I’m making something from 1x8s or wider, I have to make twice as many cuts.  Sometimes this is a pain.  But it’s obviously not a big enough pain for me to spend the extra money to go buy a bigger one haha.  Just something to consider. Either way, a miter saw of any size is guaranteed to be a good investment.  Also, watch out for sales on this saw…it’s often listed on sale for $100 (that’s how I got mine!).
Some DIY woodworking projects are too intimidating to even attempt because you don't think of yourself as a master woodworker. Backyard Woodworking dubs itself as the YouTube channel for the average guy. The channel takes you through simple projects you can do today, projects like a piggy bank, a birdhouse and a heart box—which is apparently the perfect gift for your sweetie!
​In order to excel you are going to need to read up on jig building so that you can produce consistent repeatable cuts.  Ideas for jigs are a dime a dozen online and you could easily lose a couple of hours browsing the hundreds of ideas people think up.  A more economical approach would be to build your jigs as your projects demand them.  After you go through that exercise 4-5 times, you'll find you've accumulated quite the collection of jigs without even trying. 

Repurposed materials are taken from their original intent and utilized in another fashion. This refers to barn beams or siding, old wood floors, paneling or even wood pallets that had an original purpose, but are then transformed into something completely new. The possibilities are endless, as every repurposed piece has a little piece of history that comes along with it, and gives unbelievable character to the new project.
Let’s start with perhaps the most basic tool in every household – the claw hammer. The claw on one side of the head should be well counterbalanced by the finished head, which should be somewhat rounded. The other kind of head is the waffle-head. Most commonly used in construction, it leaves a distinctive waffle mark on the wood when you drive the nail. This, of course, is not the proper nail for woodworking.
A clean well-organized environment is key to staying A clean well-organized environment is key to staying happy. The same goes for your desk. Keep the clutter at bay and organize all of your small essentials with the Dickies Work Gear 57012 Mug Organizer. Designed to fit over most mugs this clever caddy features 8 outer pockets and 6 ...  More + Product Details Close
The circular saw is pretty much the first tool I grab for any project. You can use it for both rough cutting your lumber to get started on a project or making finish cuts before final assembly of your project. You can use it to make half lap joints and a variety of other joinery methods. While a table saw or stationary miter saw might make a certain task easier, it is hard to beat the cost, portability, and versatility of a circular saw. While most of these come with a blade, here is a good all-around blade that I use.
By the way, before you yell at me about the fact that the price on the links for the nail gun is more than $200, listen up I have a handy tip:  There are sales throughout the year on this exact package for $200.  That’s how I bought mine.  Just keep checking back.  And be sure to follow me on social media.  I keep checking it, too and if I see it’s on sale, I will post it to let you all know!
I got tired of skimping on things and ending up with results I wasn't happy with. Lesser quality woods, cheaper hardware, tools that were frustrating to work with - this was my reality for too many years. And my skills really didn't improve in those years as they should have. I think part of the reason was because I often walked away for months or even years because I hated the results I was seeing.
I know I’ve been a little MIA but we’ve had a big project in the backyard, an overwhelming workload (which we planned on being MUCH less), and then decided to hire out for some help to haul away a huge amount of dirt.  Unfortunately, that ended up with the guy we hired stealing from us…..uggggh.  When will we ever learn to not be so trusting?!  Steve and I both have a problem with that……but when did being “too trusting” become such an extreme character flaw?!!  Sad.  Anyway, the whole situation is under investigation and there are some definite twists to the story that the crime-show-watcher in me would love to share with any other crime-show-watching enthusiasts out there. ;) Hopefully soon.
Steve Ramsey.  He's an energetic, fast-talking eccentric whose built his channel based on projects that can be done without investing in fancy tools.  He trudges out a banged-up table saw from his garage, chops stuff up on the bed of his truck, and generally produces well-structured projects - even if I can't agree with his design aesthetic and color choices.  Lots of good stuff to learn and a great channel for someone starting out.  
As the final stage of any project, the finish will define your piece for years to come. Whether you choose to leave the material unfinished, stained, painted, or rubbed with oils, there are many options to choose from when it comes to finishing. A finish is meant to protect the wood from water damage, dirt, stains, etc., so the benefits are obvious. At CZ Woodworking we will finish the material to your exact needs and determine what will work best for your specific piece. A piece that will endure everyday use, such as a countertop or tabletop, would need a more durable finish than a display shelf. An exterior table, if not made from a naturally weatherproof material, would have to be finished with moisture resistant materials to endure the outdoor elements such as rain and snow. Some materials – such as repurposed barn woods – would be better left unfinished in order to maintain the naturally aged look that defines it.
My name is Marc Spagnuolo and welcome to my channel. I am a podcaster, video producer, author, and woodworking enthusiast. I have contributed articles and video content to FineWoodworking.com, Popular Woodworking Magazine and WOOD Magazine. Producing the Wood Whisperer is a great way for me to combine four of my passions: woodworking, technology, education, and humor. I believe that even the most complicated woodworking project is just a series of steps. My goal with this channel is to show you the tools and techniques you need to perform those steps.
Screwdrivers are another must-have in the woodworker’s set of hand tools. Not only will you need Phillips and slot, or flathead screwdrivers, you’ll need star drivers and Torx drivers, too. A quality construction is vital to a good set of screwdrivers. So many of them are made out of soft metal, and the first time you put any “oomph” behind them, they strip out, becoming absolutely useless.
After you have chosen the perfect table saw for your wood shop, the next major purchase one should consider would be a compound miter saw. While not as expensive as a quality table saw, a compound miter saw is invaluable for cutting compound angles (beveled, mitered and combination cuts) on the ends of a piece of stock. Once you develop your ability to make precise cuts with a compound miter saw, you'll find that your circular saw spends a little more time in the drawer than it used to.

I set an initial budget of $10,000 to build the shop – everything from studs and drywall to hand tools and machinery. The final number was over by $1,000, but I’m still very happy with the result. The shop is now my haven, with a good sound sys­tem and good lighting. Every time I go back into the shop, it is exactly the way I left it, because it is my shop!
×